• Size: 635 * 486 * 1530mm
• Weight: 50kg including battery
• Lithium battery capacity: 24C/40Ah
• Recharge time: ≤ 2H
• Maximum recharging voltage: 29.4V
• Autonomy: 6H recharges automatically on its base
• Wheel: Rubber
• Driving power:150 W
• Max. torque: 30NM
• Maximum load: 50Kg
• Speed: 0.7m/s
• Navigation accuracy: ±50mm
• Navigation sensor: Lidar® (16m)
• Wireless connection: 2.4/4G Wifi
• Wireless transmission: 200M
• Environment of use: Indoor
• Certification: IP20
• Vertical clearance: 10mm
• Maximum slope: 5°.
• Disinfectant refill: 15L
• Spray density: 1500ml/
• Up to 800m2 of disinfection per hour.
• U.V. intensity: 117UW/CM 2 (per lamp)
• Disinfection: U.V. +
• Disinfectant/electrolysed water PH less than or equal to 3.5 PH (spraying via 4 nozzles)
• Voltage recharge input: AC220V
• Output: 29.4/7A
• Nominal power 200W
The sterilization robot consists of a wheeled chassis and a combination of disinfection machines: a disinfectant spray and a UV sterilization. It is ideal for commercial surfaces, schools, offices and more.
• The robot is equipped with Lidar® 3D map sensor, which can perform an omnidirectional scan and detect distances in order to map the area to be disinfected.
Depending on the use, disinfection and sterilisation must be carried out in a planned manner to avoid contact with the human body.
The robot is driven by a high-density, long-cycle lithium battery.
Thanks to its combination of two types of disinfection (U.V. + spray), it can effectively kill pathogens and micro-organisms in the environment and in the air.
Accumulated light intensity of the U.V. lamps: 836uw/cm2. Coverage radius of 6m (Lamps).
• Up to 800m2 of disinfection per hour.
• U.V. lamps
Projection nozzles
• The robot is controlled by a dedicated android smartphone application.
By logging in to the application you can access the programs to give disinfection instructions.
• LCD control screen
• Scanning the card :
The first operation of the robot is the scanning of the card. The robot automatically generates the map of its environment by controlling its movements.
It can do this automatically or manually.
When the map is scanned, click on "save map" to save it. If you wish to scan again, click on "clear map" before scanning again.
• Equipped with a human presence detection radar.